The Force USA Tandem isn’t just another cable tower—it’s a CORNERSTONE® Tower, the foundation you build your entire gym around. If it’s not from Force USA, it’s not a CORNERSTONE®. It takes everything you want in a traditional cable tower and dares to deliver twice the possibilities in the same footprint.
It starts with the versatility you expect—then doubles it. Classic moves like pulldowns, rows, flys, and curls are all here. But while most towers lock you into a single 2:1 pulley, the Tandem gives you dual Freestyle trolleys on separate uprights. Run them independently at 2:1, combine them for a true 1:1, mirror for balance, or set them at different heights for nonstop supersets.
From there, progress is endless. The 3x3 uprights unlock limitless attachments—ours or third-party—while Mag Pins add dynamic resistance and the weight stack can be upgraded from 200 up to 250 lb. Factor in the 5 lb fractional plate and anodized aluminum pulleys, and you unlock steady progress with performance that feels effortless.
And this is where the Tandem Tower pulls away. Not a bolt-on, not a single 2x2 upright stuck at 2:1—it’s a purpose-built, standalone cable system. Run it beside your rack or make it your CORNERSTONE® piece, and watch it deliver cable work the way it’s meant to be done. Either way, the Tandem Tower offers twice the versatility of others, making everything else feel like a half-measure.
And finally, the details bring it home. A matte-black electrostatic finish, sharp lines, and premium knurled attachments set the tone, while 1-inch holes let you store gear anywhere, and integrated hooks at the top keep your go-to attachments within easy reach. The Tandem Tower doesn’t just belong in your gym, it’s the perfect CORNERSTONE® piece to build your gym around.
The Tandem Tower comes loaded with essential attachments and gear, with room to upgrade when you're ready to take it up a notch or several.
The following accessories are compatible with the Tandem Tower but require the Center Connector (sold separately) to use safely:
Own two Tandem Towers? The Tandem Tower Cross Beam Connector Set bridges both towers into one unified, commercial-grade cable crossover station. Four 3x3 uprights. Four Freestyle Pulley Arms. Full crossover width. The same rock-solid 3x3 tubing, 1-inch holes, and 2-inch spacing ties everything together into a system that trains like a real gym and anchors your entire setup safely and securely.
Required to use the Sliding Bench, Swivel Seat, and Leg Holder Low Row with your Tandem Tower. Tool-free setup with secure two-pin locking.
Add a cable-connected, patent-pending Sliding Bench with leg press, hack squat, curls & extension.
Unlock 100+ seated cable exercises on your CORNERSTONE® Trainer. The Swivel Seat locks into four positions for stable, wobble-free training.
Without a proper leg hold-down, you're losing force to lift-off instead of putting it into your muscles. The Leg Holder and Low Row Footplate keeps you safely locked in through every rep, with tool-free pin adjustment to dial in the perfect fit. Compatible with the C20, Tandem Tower, Functional Trainer Rack, and any 3x3 rack with 1-inch holes and 2-inch spacing.
Adds 50 lbs per stack—add one for 250 lbs or two for 300 lbs max load on select models.
Required to connect two Tandem Towers into one cable crossover system. Stable 3x3 construction unlocks crossovers, bilateral moves, and more.
Add a 3-in-1 bench with FID settings plus leg curl, extension, and preacher curl.
Add rolling attachment and upgrade storage—customizable, mobile, always within reach.
Add assembly by screened, insured pros for expert setup—save time and skip the stress.
3 and 5-year plans with one annual maintenance visit and breakdown coverage that kicks in after your manufacturer's warranty expires.
